I need help finding the specifications for a sub-woofer enclosure?
January 1, 2010 - 7:51 am
The Probox 210SB(The enclosure company is Probox and the model is 210SB), I want to make sure a new sub-woofer i want to purchase will fit in it the speaker is a "SPL SP3-10".
Here are specs i found for that woofer.
Minimum Sealed Box Volume0.75 cubic feet
Maximum Sealed Box Volume0.75 cubic feet
Minimum Ported Box Volume1.5 cubic feet
Maximum Ported Box Volume1.5 cubic feet
And from the site im looking @ and the boxes they should work since they are .75cf or close to it.
And a lil tip add some Pollyfill which u can find in any craft store 1lb per box should work.
January 1st, 2010 at 1:15 pm
Here are specs i found for that woofer.
Minimum Sealed Box Volume0.75 cubic feet
Maximum Sealed Box Volume0.75 cubic feet
Minimum Ported Box Volume1.5 cubic feet
Maximum Ported Box Volume1.5 cubic feet
And from the site im looking @ and the boxes they should work since they are .75cf or close to it.
And a lil tip add some Pollyfill which u can find in any craft store 1lb per box should work.
References :
January 1st, 2010 at 2:03 pm
Well here is what I found for the specs for the box.http://www.proboxrocks.com/products/unloaded/superbass/110SPB/index.shtml that’s the ported one.That is 2.0 CF that alot more then your specs for the speaker. I cant find anything on the sealed box. Good luck
References :