Easiest way to enlarge a sub enclosure cutout.?
August 30, 2009 - 3:10 am
The enclosure is made of 1" MDF and has a 9.17" diameter cutout and I need it to be 9.6". Thanks
make your measurements and just use a router or jigsaw to make the required cut(s)
August 30th, 2009 at 8:55 am
make your measurements and just use a router or jigsaw to make the required cut(s)
References :
August 30th, 2009 at 9:17 am
The easiest way is to use a dremel whith a course sandindg bit and go around the edges, itll take 3-4 minutes once started 10 total.
If you need a dremel, there cheap and you will use it over and over again. this model will do fine
http://www.homedepot.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10051&langId=-1&catalogId=10053&productId=100043397&N=10000003+90005+502104+603&marketID=5&locStoreNum=358
References :
you can find there prouducts in all my trucks …
lol…
there great for every contracter,homeowner, anybody that needs to do something