what is the recommended size of enclosures for 10" subwoofer and tweeters? I am planning to DIY?
July 31, 2009 - 5:27 am
i am planning to DIY because i am on a thight budget…
pls give the exact measures of the lenght, width and height of the enclose.
I am just a newbie in setting up car audio so pls. help me out.
any answers will be highly appeciated.
thanks in advance.
according to the link, you need an enclosure for the 10” sub of about 1 to 1.5 cu.ft., so a little over 1′x1′x1′ to 1.5′x1′x1′ to accomodate the driver.
For the tweeters, i would just mount them on a solid surface without an enclosure.
July 31st, 2009 at 11:05 am
according to the link, you need an enclosure for the 10” sub of about 1 to 1.5 cu.ft., so a little over 1′x1′x1′ to 1.5′x1′x1′ to accomodate the driver.
For the tweeters, i would just mount them on a solid surface without an enclosure.
References :
http://www.termpro.com/articles/buildbox.html
July 31st, 2009 at 11:30 am
well tweeter don’t need a box.
you didn’t give speaker characteristics. the model number would have helped.
one or two woofer?
Single or dual voice coil?
Sealed, ported or bandpass?
Well since your a noob stick to sealed
width: 14-1/2"
height: 12"
bottom depth: 12-3/8"
top depth: 9-3/4"
this is the size for 1 sealed 10" woofer
References :