What type of enclosure should I be using?
June 30, 2009 - 11:22 pm
I have a Diamond Audio CM312D4 sub and its in a big MTX ported/venetd box. I cant find the specs on this sub and dont know what enclosure I should be using or what size the enclosure should be. I think mine is way too big. If anyone knows more about this or can find the specs to this sub it would be appreciated. Thanks.
cartronics has those subs and they recommend a big box, they have a box called the super bass box with linex on the outside and it will make your subs hit hard but its 200 $ for a dual. a small box will blow the sub but your box is fine. if you need the specs you can call cartronics to find out they know there stuff. here is the # if you want to call 615-865-4800 hope this helps
July 1st, 2009 at 4:27 am
This should help…
http://www.diamondaudio.com/PDF/archive/CM3/CM3_Sub_Manual.pdf
http://www.diamondaudio.com/PDF/archive/CM3/CM3_Sub_Specs.pdf
Diamond recommends 1.5 cubes at 38Hz for your sub.
Good Luck!!!
References :
MDCustomz.com
July 1st, 2009 at 4:44 am
a bigger box might make it sound better cause the bigger enclosure the harder your subs work and it will sound better that’s why people put cotton in there sub enclosures to trick the sub into thinking a bigger box
References :
July 1st, 2009 at 4:59 am
cartronics has those subs and they recommend a big box, they have a box called the super bass box with linex on the outside and it will make your subs hit hard but its 200 $ for a dual. a small box will blow the sub but your box is fine. if you need the specs you can call cartronics to find out they know there stuff. here is the # if you want to call 615-865-4800 hope this helps
References :