Porch Enclosure

K790 is Water and Dust Resistant Model.
K790 series is an advanced metal Panel PC. Its ultra slim and exquisite metal enclosure catches most eye contacts. K790 series includes four different display sizes, 12″, 15″, 17″ and 19″ equipped with high brightness TFT panel and resistive / SAW / IR touch. NEMA 4 / IP 65 dust and water proof display front meets industrial application requirements.
Beside standard model, K790 series also derivate multiple different cabinet designs such as whole color painted sheet metal housing, complete stainless steel cabinet and panel mount model. Fanless and ventless or vandal proof design are also provided. For fitting different applications, K790 series designs with desktop stand, MSR, laser scanner and camera kits.
K790 series comprehensive product line is the best choice for digital signage, kiosk, e-home, KVS, healthcare, industrial automation, transportation, gaming and other applications.

Duration : 0:1:25

(more…)

ZONEX® Enclosures are designed and certified to meet ATEX Directive 94/9/EC for hazardous locations and safely house electrical and electronic devices in EEx e Zone 1- and Zone 2-rated increased safety applications.
Hoffmans ATEX EEx e enclosures are not intended for use in explosion-proof or flame-proof applications.
Features

• Easy-to-use Type 316 stainless steel quarter-turn door latching
• 3-mm double-bit insert for security
• Slot and through-hole side-mount hanging brackets
• Lift-off door hinges
• Removable gland plates; one or three gland plates standard
Specifications

• Fabricated from Type 316 stainless steel
• Type 316 stainless steel external fasteners
• Gray silicone high-temperature gasket on doors and gland plates
• Internal/external brass earth/ground provision
Finish

#3 brushed finish
Industry Standards

ATEX Directive 94/9/EC
II 2 GD EEx e II, IP66
EN 60079-0: 2004
EN 60079-7: 2003
EN 50281-1-1: 1999
EN-50281-1-2: 1999
Certificate No. ITS06ATEX35438U
UL 508A Listed; Type 4, 4X, 12; File No. E61997
cUL C22.2 No. 94 Listed; Type 4, 4X, 12; File No. E61997
NEMA/EEMAC Type 4, 4X, 12
IEC 60529, IP66

Duration : 0:1:33

(more…)

http://wwe-co.com/Pages/Front/Auxiliary-Equipment.html#instrumentation

Instrumentation

The Water and Wastewater Equipment Company instrumentation control centers are offered in both PLC and relay control logic to suit your needs and budget. All of our instrumentation centers are supplied in a NEMA 4, water resistant, enclosure unless otherwise required. A variety of operator interfaces are available to suit your needs. The instrumentation panels come complete with all the required motor starters, fuses, relays, transformers, and disconnects. Both audio and visual alarms with push-to-silence and emergency stop buttons are included with each panel. All the necessary pH and ORP analyzers, as well as lights and switches for pumps and mixers are also included.

Instrumentation Products
•Custom PLC & Relay Control Centers
•pH / ORP Controllers
•Conductivity Monitors
•Flow Meters

Water & Wastewater Equipment Company
32100 Solon Road
Suite 101
Solon, Ohio 44139
Phone: (440) 942-7070
Fax: (440) 942-3622
Email:info@wwe-co.com

Serving The Industry Since 1978
http://www.wwe-co.com

Duration : 0:0:15

(more…)

Waterproof enclosures for wireless? This is a 36 hour submersion test of the New MikroPoynt enclosure with integrated antenna from Poynting Antennas. It shows that the MikroPoynt available in 2 and 5 GHz can meet and exceed the NEMA 6P rating requirements for water resistance. For more information go to www.poyntingusa.com

Duration : 0:1:6

(more…)

Provides an overview of the high performance design test that SHADE products must conform with.

Duration : 0:1:3

(more…)

http://www.fpmiller.com/Inventory/Pages/3764.aspx
STANDARD SPECIFICATIONS

Range:
108″ diameter x 24″ high over 96″ chuck with new segments. In loading position 48″ segment chuck clears 96″ magnetic chuck by 2″. Extended swing and vertical range available.

KVA Requirements:
150 HP.

Work Table:
Blanchard one-piece steel 96″ diameter magnetic chuck with 1 1/16″ pole spacing and 4″ center hole. Chuck uses direct current only. 3,845 watts required - supplied by Neutrofier when ordered. 230 volts DC recommended. Maximum weight of off center work load on chuck - 22,000 pounds.

Wheel:
48″ Cortland type bonus grind segment chuck. Chuck uses 8″ long CDTXL bonus grind segments, 11 per set.

Speeds:
Wheel: 297 RPM - 60 HZ; 248 RPM - 50 HZ.
Chuck: 2.6, 4.1, 6.7, 10.2 RPM - 60 HZ; 2.2, 3.4, 5.6, 8.5 - 50 HZ.
Chuck motor: 1200 RPM - 60 HZ; 1000RPM - 50 HZ.
Table traverse motor: 1200 RPM - 60 HZ; 1000 RPM - 50 HZ.
Head traverse motor: 900 RPM - 60 HZ; 750 RPM - 50 HZ.
Feed motor: 1800 RPM - 60 HZ; 1500 RPM - 50 HZ.

Feed:
Vertical down feed by hand or power. Power feed variable from.008″ (.2mm) to .096″ (2.44mm) per minute with accurate automatic stop. Maximum down feed before stop operates is .600″ (15.24mm). Wheel head has rapid raise and lower by power interlocked with feed.

Motor Data: 440 volt, 3PH, 60 cycle, 34 frame, 207 amp, 354 rpm

Standard Equipment:
96″ Blanchard one-piece steel magnetic chuck; water guards, piping; jogging push button for chuck positioning; water valves; hardened steel base ways with semi-hydrostatic automatic lubrication to base ways; automatic lubrication to column ways, feed screw nut, and wheel dresser; operator’s handbook; wheel dresser built into head; set of wrenches; and grease gun; 150 HP main spindle motor; 10 HP chuck rotation motor; torque motors for table traverse and head rapid traverse; 1/4 HP feed motor; reduced voltage push button control and ammeter in wheel motor circuit. Floor mounted control panel (N.E.M.A. - 12 enclosure) containing reduced voltage (star) starting and full voltage (delta) running starters, for main motor, line starters for small motors with thermal overload protection for all motors, and non-fused disconnect switch interlocked with door.

Weight:
Approximately 87,000 lbs. depending upon accessories.

NOTE: Machine came out of Running Plant. Machine is clean and in excellent condition.

Price below reflects “As taken from service”. Rebuild price available upon request.

F.P. Miller Company
Jackson, MI
517-787-3100
http://www.fpmiller.com

Duration : 0:0:16

(more…)

Description of Westell’s patent pending Dynamic Cooling System method of temperature control utilized in SHADE enclosures

Duration : 0:1:31

(more…)

This is a video of the two LED signs I currently have: An Alpha PPD220 and an Alpha 7120C. These signs are interfaced to the Internet, which you can send a message to at http://www.op9.net/cam/ and watch via Ustream.tv on my site. I developed Alphabrite — http://www.op9.net/tag/alphabrite/ — a suite in PHP, which allows an LED sign owner to get RSS feeds, local weather conditions/forecasts, stock quotes, and much more delivered to their sign automatically which simultaneously allowing feedback from the Internet through a simple form. This is currently the ONLY application out there that allows this advanced functionality in one package–and at less than 100kb!

The latter sign–the 7120C–is a bit bigger than I anticipated, therefore I’m likely going to sell it; I was expecting the smaller, standard version rather than the freakin’ industrial steel-encased version. As I got it at an unbelievable price, I’m not all that bothered. It has some nice features above and beyond the PPD220–namely, colors other than red–but at 60lbs and 40″ in length, it’s much better suited for a CTA station than my office.

Another idea: Take the guts out, ditch the NEMA 4-class enclosure, and fashion something a bit more compact as the case. That would actually allow me to wall-mount the unit as it’d bring the total weight down to ~15-20lbs–the case itself is ~45lbs, no kidding.

Duration : 0:2:15

(more…)

Overview of Westell’s SHADE family of outdoor enclosures.

Duration : 0:1:21

(more…)

Video presentation regarding the security features of Westell outdoor cabinets & enclosures.

Duration : 0:1:27

(more…)